How to Reduce Your Saab Key Replacement Cost
Getting your spare key copied before you lose your last one could save you a lot of cash. If you only have one key, it's usually 2X-10X as costly to make an original one.
It's cheap, easy and simple to replace the battery in your SAAB 9-3 remote. Here's how.
Cost of Replacement Key
The SAAB 9-3 03-11 is an excellent vehicle, but the ignition key is susceptible to wear out. The case may become sticky and buttons can be pushed out. This could be a issue when driving. This is why it's recommended to replace the key fob as soon you spot any issues. This will save you money in the end and is far better than putting off the replacement.
Replacing a SAAB key fob is not difficult and you can do it yourself for about $100. You'll need to purchase an alternative shell for your key fob that is compatible with your vehicle, as well as a new battery. You'll have to open the case of your old SAAB 9-3 key fob and then carefully remove the electronic components, giving you the chance to replace the battery. After you've done this it's easy to put the new battery and then resynchronize the key fob with your vehicle.
SAAB keys that have remote start systems require particular attention because they include transponders that must be programmed to match your specific vehicle. You'll require the dealer-grade Tech 2 tool or its equivalent for your Saab model to do this. The tool can read the code from your existing keys and then use this information to program your new key. This process can be more complex and may cost you up to $500 if you do not already have a spare.
It is best to locate locksmiths who work with Saabs. These professionals can make you keys at a lower cost than the dealer. They can also provide other services, like key replacement and duplicates, so that you have another key in case yours gets damaged or lost.
The majority of European automobiles manufactured after 2000 come with immobilizer systems that depend on a microchip incorporated inside the key to recognize and start your car. This is why these kinds of keys tend to be more expensive to duplicate than those that do not have chips. There are replacement saab car keys G28CarKeys . For example, VATS keys (which are mechanical but contain a small resistor value inside) do not require programming and are relatively inexpensive to duplicate. However, the majority of post-2000 BMWs, Mercedes, Porsches and Saab vehicles will require an authorized dealer to duplicate their keys. The manufacturers do not permit their dealers to join NASTF. This group develops the tools used by other automotive locksmiths to make replacement keys.
Cost of a Replacement Remote
It is essential to have an additional remote or key if you have a Saab with keyless entry. It can be used in the event that the original key gets lost or breaks. The cost of a replacement remote can be expensive, especially if you have an insurance policy that provides key add-on protection, then it can reduce the cost.
The majority of car keys made after 2000 can be programmed by a dealer or locksmith. Most of the time, these keys are stored in a tiny EEPROM chip that can only be read by a specific computer that is designed for that purpose. This means that if your vehicle requires an additional key for your vehicle, you must visit the dealer. The good news is that the dealer will charge you less than a locksmith.
The Saab 9-3 is a stunning car, and there are plenty of them still in operation across the globe today. The ignition key is the biggest issue in these cars. The key is small and poorly designed, and is easy to lose it or get stuck. In reality, a lot of people find themselves without a working key within a couple of years of owning the car.
Fortunately, it is possible to get an additional key for your SAAB and it is a simple process. First, remove the emergency key. This is a straightforward process that you can carry out yourself, and it does not require any tools at all. Be cautious though, as if you overdo it you could damage its electronic components.
You will then need to find a shop where you can get an OEM replacement key case for your SAAB. You might not be able to find these cases easily but if know where to look, you should have no difficulty finding one. Once you've found a replacement key case, you'll require it to be cut and programmable to your car.
The process of getting an additional key for your SAAB can be very expensive, but it is definitely worth it in the long run. It's cheaper than having to replace your entire vehicle and it can save you a lot of time. If you have only one key working, it's best to replace it as soon as you can. You don't know when you're likely to lose it, and this could result in a lot of frustration and expense.